logo
  stoves coal fires link-up system oxypic oxypic
       
 
 


The
Highlander-7 meets the standards of the relevant British Standards for the whole of the UK. Also meets the requirements of the Scotland Building Regulations 199 Part F.
The Highlander-7 has been developed using the best burning technology to give you a stove with a clean burn and high efficiency.
The Super Air Wash System has been designed to keep the glass clean to give a full view of the superb plane pattern created as the flames rise to meet the incoming air, this causes secondary combustion to take place, resulting in clean burn with dancing flames.   The highlander has also a superb shaker grate mechanism which allows you to set the grate for efficient wood burning (large logs up to 360mm long) or any other solid fuel including peat, coal, coal briquettes and of course all HETAS approved smokeless fuels.  Finished in heat resistant metallic black stove enamel paint and fitted with solid brass handles, black handles are available on request.

How It Works 
The Highlander has two controls. The one above the main door controls the air wash system. By sliding the left to close, right to open the air inlet holes, which then preheats the air before directing it down over the inside of the ceramic glass. This keeps the products of combination away from the glass and also creates secondary combustion to increase efficiency and reduce smoke emission from the flue.

 The control below the main door is to adjust the amount of air required for easy lighting and rapid warm up, this also controls the flow of air for varying fuels as required. The most suitable setting will quickly be found. Move the slide slowly to find the suitable position. Using the correct rate of burning, efficiencies of up to 70% can be obtained. 

  • An automatic door safety device is fitted which prevents the bottom door opening before the top door is open. This prevents serious overtiring when removing ashes from below the grate

  • The Highlander-7 is available with steel or Stainless Steel 3KW Boiler. See below for code number.

  • The Highlander-7 and 5 are available with matching canopy on request, this can be removed or replaced at any time.

  • Both the Highlander-7 and 5 are also available with top or rear flue outlet.   

HIGHLANDER 5 WITH ATTACHED LOG STORE

Why choose a Highlander-7 with attached log store?
It gives you somewhere to store the logs ready to re-fuel the stove. It makes it easier
to reach all the controls and remove the ash, which also makes it easier to use for
the older and infirm.

 

More information on accessories and sizes can be found here

INSTALLATION/OPERATING INSTRUCTIONS/BROCHURE CAN BE DOWNLOADED HERE
SIMPLY RIGHT CLICK AND 'SAVE TARGET AS' TO YOUR COMPUTER
PLEASE NOTE: DUNSLEYHEAT WILL ENDEAVOR TO KEEP INSTRUCTIONS AS UP TO DATE AS POSSIBLE BUT CANNOT BE HELD RESPONSIBLE FOR ANY INCORRECT INFORMATION DUE TO INSTRUCTIONS BEING OUTDATED.

 

STOVES  -  COAL FIRES  -  LINK-UP  -  OXYPIC  -  HOME  -  CONTACT  -  PRICELIST  -  BOOSTER