|
The new
Highlander-10
stove is a wide version of the popular Highlander 8 model, with
the same burning control system but nearly 100mm wider than the 8
and with a fuel box area to take logs up to 550mm long, this makes
the
Highlander-10 more suitable for larger rooms
The Highlander-10 has a superb air wash system designed to keep the
glass clean by diverting a warm flow of air directly over the
surface of the glass. Each door has its own primary air controls.
These control the amount of fuel being burnt and can also be
closed down for overnight burning of fossil fuels.
With a heat output of
9 - 10 kW maximum the Highlander-10 will easily heat larger rooms.
The grate
mechanism can be adjusted for burning wood or other solid fuels
including: peat, coal and coal briquettes. There is a choice of
boiler, which is available in steel or stainless steel if required
to connect into a direct hot water cylinder. This takes the place
of the rear fire brick and can be installed at the factory or at a
later date if required. See below for product code numbers.
The
Highlander-10 is available with black, brass or polished steel
knobs and is finished in black metallic paint. |
